Click image for larger view
EPDA9600 Two-Speed Control Handle
Knight Global's EPDA9600 Two-Speed Control Handle is a non-programmable handle. It is comprised of four switches to make up a (2
) two-speed operation by simply compressing the thumb levers. Halfway is one speed, fully compressed is the second speed.
The EPDA9600 Two-Speed Control Handle is also available in a Single Speed
(EPA9600), Single Speed with Trigger
(EPTA9600) and a Two-Speed with Trigger Lever
(EPDTA9600) configuration. All units come with a standard mounting flange. You will need to specify the flange adaptor tube size for your End Effector
Common Control Handle Pilot Signals
Up and Down
Retract and Extend
Forward and Reverse
Part and No Part
Tilt Up and Down
VAC On and Off
Clamp and Un-Clamp
Track Dog Off and On
) Thumb Lever Configuration.
) Switches per thumb lever.
) Single Pole 240V
UL Listed, CE Approved.
Various Mounting Options.
Product Weight: 2.5 lbs.
4-Pin Micro Single Pole Limit Switch
Knight Global's Single Pole Limit Switches have 1-N/O (Normally/Open) and 1- N/C (Normally/Closed) contact with M12 Connectors. (M12 and 4-pin female cables sold separately).
Click on image below to view/print
Control Handle Accessories