Search 
  
 

Home / Rail Systems / Aluminum Rails / TR2000 Series Accessories / TR2000 Series Load Hangers / I-Beam Extended Stack Rod and Ball Load Hangers for Direct Loads
I-Beam Extended Stack Rod and Ball Load Hangers for Direct Loads

TRH20471
Knight TRH20471 I-Beam Extended Stack Rod and Ball Load Hangers for Direct Loads

TRH20511
Knight TRH20511 I-Beam Extended Stack Rod and Ball Load Hangers for Direct Loads

APPLICATION

  • SuspendsKnight TR2000 Aluminum Rail
  • Attaches to 2in. [51mm] - 11in. [279mm] I-Beam flange (see chart below).
  • Includes 1ft. [0.3m] threaded rod.
  • Optional threaded rod lengths are available up to 12ft. [3.6m].
  • Rod lengths 2ft. [0.6m] or greater require the use of V-Sway Braces (MRWS40161 or MRWS41431).
  • Structural steel can be perpendicular or parallel to the Knight rail.
  • Optional Safety Cable (RWA2133).

ENGINEERING DATA

  • Load Hangers are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of 49 ksi and a yield point of 30 ksi.
  • All load hangers are coated with an environmentally friendly corrosion protection (Autophoretic ACC 800).
 
 
Rail Series
Part Number
Weight
Structural Support Flange Size
in. [mm]
Direct or Offset Load
Adjustable or Fixed Height
TR2000
TRH20471
7.3lbs. / 3.31kg.
2.00"-7.00"
[51.0mm-178.0mm]
Direct Load
Adjustable Height
TRH20511
8.5lbs. / 3.86kg.
7.00"-11.00"
[178.0mm-279.0mm]
TRH20471
Click on Image Below for Full Size
TRH20511
Click on Image Below for Full Size