APPLICATION
- Tows fixtures, bridges, and heavier loads.
- Typically used to assist an operator to push, pull, or position loads.
- Integrating an air tractor with a pneumatic fixture allows for multiple control configurations such as: automatic return home, convey a load to the next position, start and stop limits, etc.
- Use in conjunction with RAD4110 and TR2000 Knight Aluminum Rail Systems.
|
|
ENGINEERING
DATA
- Max. air consumption: 72 cfm
- Max. speed: 3.5 ft/sec. [2.4mph]
- MCBF: > 250,000 (> 5,000,000 linear ft of travel)
- Maximum tow capacity: 300 lbs. [136 kg.]
- FIll in-line oiler with SAE 10W low
non-detergent oil before use. Air tractor is delivered with in-line oiler empty.
- Oil level should be periodically checked to ensure that the oil level is 0.5 in. [12.7mm] above the siphon tube.
- In-line oiler is pre-set to deliver (1) one drip every (5) five seconds.
|
