From Auto Alliance Assembly Plant in Flat Rock, MI

Knight Global provides about 95% of all the ergo equipment in the plant.  We used to use two or three sources, but no other vendor provided the service and expertise that the people at Knight provide.  Their response time, if there is a problem, is excellent and the solutions that they supply are very well thought out.  Nice job to everyone at Knight.

From Johnson Controls Bridgewater Interiors Plant, Detroit, MI

Just wanted to let you know that we had a problem with the emblem on our Ford truck
seats.  We had the emblem supplier quote a fixture to check the seat to make sure that the emblem was secure.  This was a very critical issue and their response was very slow.  When I called Knight Global to come and look at this problem, not only did they come up with a solution, they had a fixture built and delivered the same day.  From all of us that were working on this problem, we really want to say thanks for all your efforts.

From Tooling Technologies in Houston, TX:

And I wanted to send you a note of thanks before we get really entrenched in these projects! I have to give a load of praise to everyone that has been assisting me in our BAE project!!! Unequivocally, Knight and your people have shown the highest level of customer service of any company we are aligned with on this huge project. Myself and Tooling Technologies want to thank you for all your support and giving us the ability to exceed our customers expectations!

It would make me proud if we emulated your levels of support!

Thanks again!

From Peterbilt Motors in Denton, TX:

Peterbilt Motors recently reported that they have replaced about 85% of a competitor’s rail with Knight Aluminum Rail.  When asked to comment, they said:  “For us, Knight Aluminum Rail was an easy decision.  It provides exceptional flexibility.  It is durable and requires little to no maintenance.  Aesthetics is also a top priority.  We have had these systems for many years and they still look good.”

From Chrysler North Assembly Plant in St. Louis, MO:

Chrysler tooling engineers have been working with Knight for many years.  Whenever they had an application, they would contact Knight and their distributor (PTP) for a solution.  They have come to know through experience, that Knight had the best knowledge and resources to tackle any tough job.  They knew that Knight would not be the least expensive product, but the best.  You get what you pay for!!!

From Jasper Engines and Transmissions in Jasper, IN:

Jasper Engines recently commented on the Knight Global Torque Converter Lift Assist by saying, “The system looks great.  The installation went very smooth.  The ease of operation with the Knight system has significantly increased production while leaving our associates less fatigued at the end of their shift.”

From Trane Company in Pueblo, CO:

Process engineering was asked to find a solution on an application that required multiple rotations on product placement.  Knight came prepared to offer an ergonomic solution.  After several visits to the customer’s location, the team put together a project that won Trane’s approval.  It has been two years now since the equipment was installed.  Trane has realized a significant savings in lost time injuries and has increased production rates.  Trane has also commented on how responsive the personnel at Knight Global have been to address customer needs.

From Banjo Corporation in Crawfordsville, IN:

Automation Engineering would like to take a moment to extend our appreciation to the Sales and Support staff of Edlo Engineering and Sales on the successful completion of our Knight Servo Hoist Project.  Banjo manufactures a line of centrifugal water pumps for the agriculture and chemical industries.  We were in need of a product capable of lifting and positioning these pumps during packaging.  The Knight hoist was the perfect solution and its integrated float control makes it incredibly easy for the operator to use while positioning the pump in the box.  Installation was simple and within 2 days we were up and running.

From Hill-Rom Company in Batesville, IN:

When recently asked about the Knight Servo Hoist application, Hill-Rom responded: “We replaced a can type air balancer with a Knight Servo Hoist.  The operators are very pleased with the operation of the servo hoist.  It gives them the ability to precisely place the top onto the frame.  The speed of the servo hoist has also reduced the time of assembly.”

From Raytheon Company in Tucson, AZ:

Raytheon recently commented on several Knight Servo Hoists installed during 2007 and 2008 by saying:  “The Knight products and services we have received through Anson and Associates have proven to be a smart investment for our factories here at Raytheon Missile Systems.  The hoists we purchased have required little maintenance and provide the virtual limits and controls necessary to ensure our products are handled safely.  They are versatile and valuable assets in our factories.  We find that the cost is competitive and the quality is great.  While there are many manufacturers we could purchase hoists and similar material handling equipment from, we find that none offer the customer support that we receive with the Knight products.  Customer service is extremely important when considering what equipment to purchase and we find that we get the best customer service with Knight Products.”