Search 
  
 

Home / Rail Systems / Aluminum Rails / RAD4110 Series Accessories / Hose Trolley
Hose Trolley

MRMA4019
Knight MRMA4019 Hose Trolley

APPLICATION

  • Travels inside RAD4110 Series Rail.
  • Carries festooned hose used in hose management kits.
  • Installation Tip: Alternate the “U” bolts from inside to outside when installing festoon hose. This will allow for minimal stack-up lengths.

INSTALLATION EXAMPLE
(Take note of alternating U-Bolts)

ENGINEERING DATA

  • Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.
  • Fiberglass filled High Impact Plastic Wheels
  • Side guide rollers and trolley wheels double-shielded bearings keep dirt out and do not require any lubrication.
  • The use of double-shielded bearings within the guide rollers prevents drag on the hose trolley.
  • Max. temp at 100% load -20 degs. F to 248 degs. F.
 
 
Rail Series
Part Number
Weight
RAD4110
MRMA4019
2.5 lbs. / 1.13 kg.
MRMA4019
Click on Image Below for Full Size