Search 
  
 

Home / Rail Systems / Aluminum Rails / RAD4100 or RAD7500 Curved Series Accessories / RAD4100 and RAD7500 Curved Series Load Hangers / I-Beam Short Stack Rod and Ball Load Hangers for Direct Loads
I-Beam Short Stack Rod and Ball Load Hangers for Direct Loads

MRHS44221
Knight MRHS44221 I-Beam Short Stack Rod and Ball Load Hanger for Direct Loads

MRHS49111
Knight MRHS49111 I-Beam Short Stack Rod and Ball Load Hanger for Direct Loads

MRHS44241
Knight MRHS44241 I-Beam Short Stack Rod and Ball Load Hanger for Direct Loads

MRHS49131
Knight MRHS49131 I-Beam Short Stack Rod and Ball Load Hanger for Direct Loads

APPLICATION

  • Suspends all Knight Curved Series Rail.
  • Attaches up to 2in. [51mm] – 11in.[279mm] I-Beam flange (see chart below).
  • Structural support must be parallel to rail.
  • Optional Safety Cable Kits (RWA4133).

ENGINEERING DATA

  • Load Hangers are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of 49 ksi and a yield point of 30 ksi.
  • All load hangers are coated with an environmentally friendly corrosion protection (Autophoretic ACC 800).
 
 
Curved Rail Series
Part Number
Weight
Structural Support Flange Size
in. [mm]
Offset or Direct Load
Adjustable or Fixed Height
RAD4100
MRHS44221
8.6lbs. / 3.90kg.
2.00"-7.00"
[51.0mm-178.0mm]
Direct Load
Adjustable Height
RAD7500
MRHS49111
RAD4100
MRHS44241
9.8lbs./4.45kg.
7.00"-11.00"
[178.0mm-279.0mm]
RAD7500
MRHS49131
MRHS44221
Click on Image Below for Full Size
MRHS49111
Click on Image Below for Full Size
MRHS44241
Click on Image Below for Full Size
MRHS49131
Click on Image Below for Full Size