Search 
  
 

Home / Rail Systems / Aluminum Rails / RAD4110 or RAD7510 Series Accessories / RAD4110-RAD7510 Series Load Hangers / I-Beam Short Stack Load Hangers for Direct or Offset Loads (Parallel to I-Beam only)
I-Beam Short Stack Load Hangers for Direct or Offset Loads (Parallel to I-Beam only)

MRHS40821
Knight MRHS40821 I-Beam Short Stack Load Hanger for Direct or Offset Loads (Parallel to I-Beam only)

MRHS40861
Knight MRHS40861 I-Beam Short Stack Load Hanger for Direct or Offset Loads (Parallel to I-Beam only)

APPLICATION

  • Suspends all Knight Aluminum Rail.
  • Attaches up to 2in. [51mm] – 11in.[279mm] I-beam flange (see chart below).
  • Structural support must be parallel to Knight rail.
  • Optional Safety Cable Kits (RWA4133).

ENGINEERING DATA

  • Load Hangers are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of 49 ksi and a yield point of 30 ksi.
  • All load hangers are coated with an environmentally friendly corrosion protection (Autophoretic ACC 800).
 
 
Rail Series
Part Number
Weight
Structural Aluminum Flange Size in [mm]
Direct or Offset Load
Adjustable or Fixed Height
RAD4110
MRHS40821
8.0lbs. / 3.63kg.
2.00"-7.00"
[51.0mm-178.0mm]
Direct or Offset Load
Fixed Height
RAD7510
RAD4110
MRHS40861
9.1lbs. / 4.13kg.
7.00"-11.00"
[178.0mm-279.0mm]
RAD7510

MRHS40821
Click on Image Below for Full Size
MRHS40861
Click on Image Below for Full Size