Contact us at (248) 377-4950
 
 
 
   
   
  Products


Follow us on:

Rack and Pinion Servo Tractor
Knight KST Series Rack and Pinion Servo Tractor
Accessories
Email This Page
Print This Page
Print Brochure
Part Information
Accurately locates a load in the X and Y directions.
  • For loads up to 4000 lbs. [1814.37 kg.]
  • Variable speed up to 261ft. per min. [79 mpm] **Dependant upon application
  • Industry standard 24 VDC, 2 AMP power is available for custom tooling such as: clamps, vacuum cups, switches, proximity limits, lights, etc.
  • H5 rated (continuous duty cycle)
  • 240 VAC, single phase 50/60 Hz.
  • Illuminated Run/Stop Button
  • Programmable Overload Capability
  • Power and Free Drive Wheel
  • Non-Slip Rack and Pinion Drive System
  • Absolute Positioning
  • Clutch (24 VDC)
  • Programming and Diagnostic Communication Port
  • I/O Capabilities
  • Optional Pendant
  • LED Status Indicators
  • LED Fault Diagnostics
  • Virtual Travel Limits
  • Speed Reduction Zones
 
Part
Number
Capacity
lbs. [kg.]
Maximum Speed
Voltage/ Phase
Part Weight
lbs. [kg.]
KST4000
4000 [1814.37]
261.8 fpm [79mpm]
240 / 1 Phase
KST4000
4000 [1814.37]
174.53 fpm [53.2mpm]
240 / 1 Phase
Home | Arms | Balancers | Controls | Jib Cranes | Lift Assists | Servo Systems | Torque Tubes | Tables/Shuttles/Carts | Tractors | Workstation Cranes/Rails

© 2006-2010 Knight Global. All rights reserved.
"Due to continuous product development, Knight Industries reserves the right to alter product specifications without prior notice."