Contact us at (248) 377-4950
 
 
 
   
   
  Products


Follow us on:

Spring Balancers
Knight KBG Series Spring Balancer
Accessories
Email This Page
Print This Page
Print Brochure
Part Information
Spring balancers are a lower cost option or where pressurized air is not available and are primarily used to support small air tools in workstation environments. These loads are not removed or dropped-off but remain on the spring clip. Knight's maximum spring balancer capacity is 23 lbs. [10.4 kg.] with a 96 in. [143.8 cm] travel.
  • Light tool applications, portable hand tools, welder guns, spray guns, remote pendants, and fixture stabilization.
  • Maximum Capacity: Up to 23 lbs. [10.43 kg.]
  • Maximum Cable Length: 96 in. [243 cm]
  • No Air Supply Needed.
  • Rugged steel construction.
  • Reinforced hanging bracket with safety hook for ceiling mounting and extra holes for safety cable attachment.
  • Ratchet Lock
  • Spring is permantley lubricated and provides constand tension. Adjustable for balancing tool in normal working zone 6 to 18 in. [152 to 457y mm].
  • 920 lbs. [417 kg.] test 0.09 in. [2.3 mm] dia. 7x7 strand galvanized steel aircraft cable nylon covered to 0.12 in. [3.0 mm] O.D.
 
Part
Number
Cable Length
in. [mm]
Reel Weight
lbs. [kg.]
Min-Max Load
lbs. [kg.]
Ratchet Lock

Part Weight
lbs. [kg.]

KBG03
96 [2438]
6 [2.72]
3-7 [1.36-3.17]
No
KBG07
5-10 [2.27-4.54]
No
KBG10
7 [3.18]
8-12 [3.63-5.44]
No
KBG15
8 [3.63]
10-15 [4.54-6.81]
No
KBG20
16-23 [7.25-10.43]
No
KBG03L
6 [2.72]
3-7 [1.36-3.17]
Yes
KBG07L
5-10 [2.27-4.54]
Yes
KBG10L
7 [3.18]
8-12 [3.63-5.44]
Yes
KBG15L
8 [3.63]
10-15 [4.54-6.81]
Yes
KBG20L
16-23 [7.25-10.43]
Yes
Home | Arms | Balancers | Controls | Jib Cranes | Lift Assists | Servo Systems | Torque Tubes | Tables/Shuttles/Carts | Tractors | Workstation Cranes/Rails

© 2006-2010 Knight Global. All rights reserved.
"Due to continuous product development, Knight Industries reserves the right to alter product specifications without prior notice."