Search 
  
 

Home / Rail Systems / Aluminum Rails / HAD3000 and HAD3500 Series Rail
HAD3000 and HAD3500 Series Rail
The Knight HAD3000 and HAD3500 tool rail is used for light duty applications such as weld guns, work benches /stations, filter/regulator/lubrication (FRL), festooning, light fixtures, etc.

HAD3000
Knight HAD3000 Series Aluminum Rail


ENGINEERING DATA

  • Weight: 3.3lbs./ft. (1.50kg./m)
  • Mechanical Properties: ASTM B221 6005-TS Aluminum

FEATURES AND OPTIONS

  • 5:1 Safety Factor
  • Weld Free Splice
  • Pre-Assembled Accessories
  • Pre-Drilled air ports every 5ft. [1.3m]
  • Extruded aluminum surfaces combined with nylon wheel load trolleys allow for low friction ergonomic movement.
  • "O" ring seals provide a better air supply free of contaminates.
  • 3/8 in. [9.5mm] or 1/2 in. [12.7mm] NPT air outlet connector.
  • 1 in. [25mm] NPT plant air inlet connector.
  • Certifications and Drawings Available
  • Simple installation and easy maintenance:
    • No welding or grinding
    • Modular connection to structural support
    • Modular connection between sections.

APPLICATION

  • Used for light duty applications, such as weld guns, work benches/stations, festooning management, light fixtures, etc.
  • 125lbs. [56kg.] Maximum Load Capacity.
  • Chambered rail can be used as a fluid power distribution system for non-caustic fluids.
  • Serves as a manifold which provides more CFM to the tool when compared to black pipe.

HAD3500
Knight HAD3500 Series Aluminum Rail

ENGINEERING DATA

  • Weight: 2.6lbs./ft. (1.18kg./m)
  • Mechanical Properties: ASTM B221 6005-TS Aluminum

FEATURES AND OPTIONS

  • 5:1 Safety Factor
  • Weld Free Splice
  • Pre-Assembled Accessories
  • Extruded aluminum surfaces combined with nylon wheel load trolleys allow for low friction ergonomic movement.
  • Certifications and Drawings Available
  • Simple installation and easy maintenance:
    • No welding or grinding
    • Modular connection to structural support
    • Modular connection between sections.

APPLICATION

  • Used for light duty applications, such as weld guns, work benches/stations, festooning management, light fixtures, etc.
  • 125lbs. [56kg.] Maximum Load Capacity.
 
HAD3000
Click on Image Below for Full Size
HAD3500
Click on Image Below for Full Size
HAD3000/3500 RAIL CAPACITIES
Hanger Span
Deflection Criteria
HAD3000
HAD3500
Capacity @ 1:350
Capacity @ 1:450
ft
m
lbs
kg
lbs
kg
5
1.52
125
57
125
57
6
1.83
125
57
125
57
7
2.13
125
57
125
57
8
2.45
125
57
125
57
9
2.74
125
57
125
57
10
3.05
125
57
125
57
11
3.35
125
57
122
56
12
3.66
125
57
104
47
13
3.96
125
57
84
38
14
4.27
125
57
77
35
15
4.57
125
57
70
31
16
4.88
125
57
60
27
17
5.18
113
51
54
24
18
5.49
100
45
52
23
19
5.79
91
41
46
20
20
6.10
82
37
11
19
Knight Industries follows material handling industry standards in determining the capacity ratings for enclosed track overhead rail systems. Each component (e.g. rail, hangers, trolleys,etc.) is individually tested to establish its ultimate failure point. From this number, a safe working load (based on a 5:1 safety factor) is then assigned to the component. Each rail span length is then tested to determine the maximum single point load required to achieve a predetermined deflection based on a 1:350 ratio (1" of deflection for each 350" of length). The recommended rated capacity chart is based upon single point loading for the listed spans. The maximum of 2500 lbs. is a function of the 5:1 safety for the component with the lowest tested failure point (Note: The lowest failure point is in the 15,000 lbs. (6804 kg) range.